Controls & peripherals

Controls & peripherals

Mounted the handbrake, shifter, and emergency stop while keeping the cable path clear around the pedal tray.

Build log (343)Photos (1)

Build Log

343 entries

Showcase refresh

Nov 19, 2026 0.75h

Bundled the last two USB leads into the rear loom so the floor under the seat stays clear.

Showcase refresh

Nov 18, 2026 0.75h

Bundled the last two USB leads into the rear loom so the floor under the seat stays clear.

Showcase refresh

Nov 17, 2026 0.75h

Bundled the last two USB leads into the rear loom so the floor under the seat stays clear.

Showcase refresh

Nov 16, 2026 0.75h

Bundled the last two USB leads into the rear loom so the floor under the seat stays clear.

Showcase refresh

Nov 15, 2026 0.75h

Bundled the last two USB leads into the rear loom so the floor under the seat stays clear.

Showcase refresh

Nov 14, 2026 0.75h

Bundled the last two USB leads into the rear loom so the floor under the seat stays clear.

Showcase refresh

Nov 13, 2026 0.75h

Bundled the last two USB leads into the rear loom so the floor under the seat stays clear.

Showcase refresh

Nov 12, 2026 0.75h

Bundled the last two USB leads into the rear loom so the floor under the seat stays clear.

Showcase refresh

Nov 11, 2026 0.75h

Bundled the last two USB leads into the rear loom so the floor under the seat stays clear.

Showcase refresh

Nov 10, 2026 0.75h

Bundled the last two USB leads into the rear loom so the floor under the seat stays clear.

Showcase refresh

Nov 09, 2026 0.75h

Bundled the last two USB leads into the rear loom so the floor under the seat stays clear.

Showcase refresh

Nov 08, 2026 0.75h

Bundled the last two USB leads into the rear loom so the floor under the seat stays clear.

Showcase refresh

Nov 07, 2026 0.75h

Bundled the last two USB leads into the rear loom so the floor under the seat stays clear.

Showcase refresh

Nov 06, 2026 0.75h

Bundled the last two USB leads into the rear loom so the floor under the seat stays clear.

Showcase refresh

Nov 05, 2026 0.75h

Bundled the last two USB leads into the rear loom so the floor under the seat stays clear.

Showcase refresh

Nov 04, 2026 0.75h

Bundled the last two USB leads into the rear loom so the floor under the seat stays clear.

Showcase refresh

Nov 03, 2026 0.75h

Bundled the last two USB leads into the rear loom so the floor under the seat stays clear.

Showcase refresh

Nov 02, 2026 0.75h

Bundled the last two USB leads into the rear loom so the floor under the seat stays clear.

Showcase refresh

Oct 31, 2026 0.75h

Bundled the last two USB leads into the rear loom so the floor under the seat stays clear.

Showcase refresh

Oct 30, 2026 0.75h

Bundled the last two USB leads into the rear loom so the floor under the seat stays clear.

Showcase refresh

Oct 28, 2026 0.75h

Bundled the last two USB leads into the rear loom so the floor under the seat stays clear.

Showcase refresh

Oct 27, 2026 0.75h

Bundled the last two USB leads into the rear loom so the floor under the seat stays clear.

Showcase refresh

Oct 25, 2026 0.75h

Bundled the last two USB leads into the rear loom so the floor under the seat stays clear.

Showcase refresh

Oct 23, 2026 0.75h

Bundled the last two USB leads into the rear loom so the floor under the seat stays clear.

Showcase refresh

Oct 21, 2026 0.75h

Bundled the last two USB leads into the rear loom so the floor under the seat stays clear.

Showcase refresh

Oct 19, 2026 0.75h

Bundled the last two USB leads into the rear loom so the floor under the seat stays clear.

Showcase refresh

Oct 17, 2026 0.75h

Bundled the last two USB leads into the rear loom so the floor under the seat stays clear.

Re-routed USB cables

Oct 16, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Re-routed USB cables

Oct 15, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Showcase refresh

Oct 15, 2026 0.75h

Bundled the last two USB leads into the rear loom so the floor under the seat stays clear.

Re-routed USB cables

Oct 14, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Re-routed USB cables

Oct 13, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Showcase refresh

Oct 13, 2026 0.75h

Bundled the last two USB leads into the rear loom so the floor under the seat stays clear.

Re-routed USB cables

Oct 12, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Re-routed USB cables

Oct 11, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Showcase refresh

Oct 11, 2026 0.75h

Bundled the last two USB leads into the rear loom so the floor under the seat stays clear.

Re-routed USB cables

Oct 10, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Re-routed USB cables

Oct 09, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Mounted the sequential shifter arm

Oct 09, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Showcase refresh

Oct 09, 2026 0.75h

Bundled the last two USB leads into the rear loom so the floor under the seat stays clear.

Mounted the sequential shifter arm

Oct 08, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Re-routed USB cables

Oct 08, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Mounted the sequential shifter arm

Oct 07, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Re-routed USB cables

Oct 07, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Showcase refresh

Oct 07, 2026 0.75h

Bundled the last two USB leads into the rear loom so the floor under the seat stays clear.

Re-routed USB cables

Oct 06, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Mounted the sequential shifter arm

Oct 06, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Mounted the sequential shifter arm

Oct 05, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Re-routed USB cables

Oct 05, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Showcase refresh

Oct 05, 2026 0.75h

Bundled the last two USB leads into the rear loom so the floor under the seat stays clear.

Re-routed USB cables

Oct 04, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Mounted the sequential shifter arm

Oct 04, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Re-routed USB cables

Oct 03, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Mounted the sequential shifter arm

Oct 03, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Showcase refresh

Oct 03, 2026 0.75h

Bundled the last two USB leads into the rear loom so the floor under the seat stays clear.

Re-routed USB cables

Oct 02, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Mounted the sequential shifter arm

Oct 02, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Re-routed USB cables

Oct 01, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Mounted the sequential shifter arm

Oct 01, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Showcase refresh

Oct 01, 2026 0.75h

Bundled the last two USB leads into the rear loom so the floor under the seat stays clear.

Re-routed USB cables

Sep 30, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Mounted the sequential shifter arm

Sep 30, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Re-routed USB cables

Sep 29, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Mounted the sequential shifter arm

Sep 29, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Showcase refresh

Sep 29, 2026 0.75h

Bundled the last two USB leads into the rear loom so the floor under the seat stays clear.

Re-routed USB cables

Sep 28, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Mounted the sequential shifter arm

Sep 28, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Re-routed USB cables

Sep 27, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Mounted the sequential shifter arm

Sep 27, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Showcase refresh

Sep 27, 2026 0.75h

Bundled the last two USB leads into the rear loom so the floor under the seat stays clear.

Mounted the sequential shifter arm

Sep 26, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Re-routed USB cables

Sep 26, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Re-routed USB cables

Sep 25, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Mounted the sequential shifter arm

Sep 25, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Showcase refresh

Sep 25, 2026 0.75h

Bundled the last two USB leads into the rear loom so the floor under the seat stays clear.

Re-routed USB cables

Sep 24, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Mounted the sequential shifter arm

Sep 24, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Mounted the sequential shifter arm

Sep 23, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Re-routed USB cables

Sep 23, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Showcase refresh

Sep 23, 2026 0.75h

Bundled the last two USB leads into the rear loom so the floor under the seat stays clear.

Mounted the sequential shifter arm

Sep 22, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Re-routed USB cables

Sep 22, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Re-routed USB cables

Sep 21, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Mounted the sequential shifter arm

Sep 21, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Showcase refresh

Sep 21, 2026 0.75h

Bundled the last two USB leads into the rear loom so the floor under the seat stays clear.

Mounted the sequential shifter arm

Sep 20, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Re-routed USB cables

Sep 20, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Mounted the sequential shifter arm

Sep 19, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Re-routed USB cables

Sep 19, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Showcase refresh

Sep 19, 2026 0.75h

Bundled the last two USB leads into the rear loom so the floor under the seat stays clear.

Re-routed USB cables

Sep 18, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Mounted the sequential shifter arm

Sep 18, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Mounted the sequential shifter arm

Sep 17, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Re-routed USB cables

Sep 17, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Showcase refresh

Sep 17, 2026 0.75h

Bundled the last two USB leads into the rear loom so the floor under the seat stays clear.

Re-routed USB cables

Sep 16, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Mounted the sequential shifter arm

Sep 16, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Re-routed USB cables

Sep 15, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Mounted the sequential shifter arm

Sep 15, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Showcase refresh

Sep 15, 2026 0.75h

Bundled the last two USB leads into the rear loom so the floor under the seat stays clear.

Mounted the sequential shifter arm

Sep 14, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Re-routed USB cables

Sep 14, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Mounted the sequential shifter arm

Sep 13, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Re-routed USB cables

Sep 13, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Showcase refresh

Sep 13, 2026 0.75h

Bundled the last two USB leads into the rear loom so the floor under the seat stays clear.

Re-routed USB cables

Sep 12, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Mounted the sequential shifter arm

Sep 12, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Re-routed USB cables

Sep 11, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Mounted the sequential shifter arm

Sep 11, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Showcase refresh

Sep 11, 2026 0.75h

Bundled the last two USB leads into the rear loom so the floor under the seat stays clear.

Mounted the sequential shifter arm

Sep 10, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Re-routed USB cables

Sep 10, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Re-routed USB cables

Sep 09, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Mounted the sequential shifter arm

Sep 09, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Showcase refresh

Sep 09, 2026 0.75h

Bundled the last two USB leads into the rear loom so the floor under the seat stays clear.

Re-routed USB cables

Sep 08, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Mounted the sequential shifter arm

Sep 08, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Re-routed USB cables

Sep 07, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Mounted the sequential shifter arm

Sep 07, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Showcase refresh

Sep 07, 2026 0.75h

Bundled the last two USB leads into the rear loom so the floor under the seat stays clear.

Re-routed USB cables

Sep 06, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Mounted the sequential shifter arm

Sep 06, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Mounted the sequential shifter arm

Sep 05, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Re-routed USB cables

Sep 05, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Showcase refresh

Sep 05, 2026 0.75h

Bundled the last two USB leads into the rear loom so the floor under the seat stays clear.

Re-routed USB cables

Sep 04, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Mounted the sequential shifter arm

Sep 04, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Showcase refresh

Sep 04, 2026 0.75h

Bundled the last two USB leads into the rear loom so the floor under the seat stays clear.

Mounted the sequential shifter arm

Sep 03, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Re-routed USB cables

Sep 03, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Re-routed USB cables

Sep 02, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Mounted the sequential shifter arm

Sep 02, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Showcase refresh

Sep 02, 2026 0.75h

Bundled the last two USB leads into the rear loom so the floor under the seat stays clear.

Mounted the sequential shifter arm

Sep 01, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Re-routed USB cables

Sep 01, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Showcase refresh

Sep 01, 2026 0.75h

Bundled the last two USB leads into the rear loom so the floor under the seat stays clear.

Mounted the sequential shifter arm

Aug 31, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Re-routed USB cables

Aug 31, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Mounted the sequential shifter arm

Aug 30, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Re-routed USB cables

Aug 30, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Showcase refresh

Aug 30, 2026 0.75h

Bundled the last two USB leads into the rear loom so the floor under the seat stays clear.

Mounted the sequential shifter arm

Aug 29, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Re-routed USB cables

Aug 29, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Mounted the sequential shifter arm

Aug 28, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Re-routed USB cables

Aug 28, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Showcase refresh

Aug 28, 2026 0.75h

Bundled the last two USB leads into the rear loom so the floor under the seat stays clear.

Re-routed USB cables

Aug 27, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Mounted the sequential shifter arm

Aug 27, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Showcase refresh

Aug 27, 2026 0.75h

Bundled the last two USB leads into the rear loom so the floor under the seat stays clear.

Mounted the sequential shifter arm

Aug 26, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Re-routed USB cables

Aug 26, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Re-routed USB cables

Aug 25, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Mounted the sequential shifter arm

Aug 25, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Showcase refresh

Aug 25, 2026 0.75h

Bundled the last two USB leads into the rear loom so the floor under the seat stays clear.

Mounted the sequential shifter arm

Aug 24, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Re-routed USB cables

Aug 24, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Re-routed USB cables

Aug 23, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Mounted the sequential shifter arm

Aug 23, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Showcase refresh

Aug 23, 2026 0.75h

Bundled the last two USB leads into the rear loom so the floor under the seat stays clear.

Mounted the sequential shifter arm

Aug 22, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Re-routed USB cables

Aug 22, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Showcase refresh

Aug 22, 2026 0.75h

Bundled the last two USB leads into the rear loom so the floor under the seat stays clear.

Re-routed USB cables

Aug 21, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Mounted the sequential shifter arm

Aug 21, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Showcase refresh

Aug 21, 2026 0.75h

Bundled the last two USB leads into the rear loom so the floor under the seat stays clear.

Mounted the sequential shifter arm

Aug 20, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Re-routed USB cables

Aug 20, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Mounted the sequential shifter arm

Aug 19, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Re-routed USB cables

Aug 19, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Showcase refresh

Aug 19, 2026 0.75h

Bundled the last two USB leads into the rear loom so the floor under the seat stays clear.

Mounted the sequential shifter arm

Aug 18, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Re-routed USB cables

Aug 18, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Showcase refresh

Aug 18, 2026 0.75h

Bundled the last two USB leads into the rear loom so the floor under the seat stays clear.

Re-routed USB cables

Aug 17, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Mounted the sequential shifter arm

Aug 17, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Showcase refresh

Aug 17, 2026 0.75h

Bundled the last two USB leads into the rear loom so the floor under the seat stays clear.

Re-routed USB cables

Aug 16, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Mounted the sequential shifter arm

Aug 16, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Re-routed USB cables

Aug 15, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Mounted the sequential shifter arm

Aug 15, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Showcase refresh

Aug 15, 2026 0.75h

Bundled the last two USB leads into the rear loom so the floor under the seat stays clear.

Re-routed USB cables

Aug 14, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Mounted the sequential shifter arm

Aug 14, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Re-routed USB cables

Aug 13, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Mounted the sequential shifter arm

Aug 13, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Showcase refresh

Aug 13, 2026 0.75h

Bundled the last two USB leads into the rear loom so the floor under the seat stays clear.

Re-routed USB cables

Aug 12, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Mounted the sequential shifter arm

Aug 12, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Showcase refresh

Aug 12, 2026 0.75h

Bundled the last two USB leads into the rear loom so the floor under the seat stays clear.

Mounted the sequential shifter arm

Aug 11, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Re-routed USB cables

Aug 11, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Mounted the sequential shifter arm

Aug 10, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Re-routed USB cables

Aug 10, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Showcase refresh

Aug 10, 2026 0.75h

Bundled the last two USB leads into the rear loom so the floor under the seat stays clear.

Mounted the sequential shifter arm

Aug 09, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Re-routed USB cables

Aug 09, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Showcase refresh

Aug 09, 2026 0.75h

Bundled the last two USB leads into the rear loom so the floor under the seat stays clear.

Mounted the sequential shifter arm

Aug 08, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Re-routed USB cables

Aug 08, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Re-routed USB cables

Aug 07, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Mounted the sequential shifter arm

Aug 07, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Showcase refresh

Aug 07, 2026 0.75h

Bundled the last two USB leads into the rear loom so the floor under the seat stays clear.

Re-routed USB cables

Aug 06, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Mounted the sequential shifter arm

Aug 06, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Mounted the sequential shifter arm

Aug 05, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Re-routed USB cables

Aug 05, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Showcase refresh

Aug 05, 2026 0.75h

Bundled the last two USB leads into the rear loom so the floor under the seat stays clear.

Mounted the sequential shifter arm

Aug 04, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Re-routed USB cables

Aug 04, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Showcase refresh

Aug 04, 2026 0.75h

Bundled the last two USB leads into the rear loom so the floor under the seat stays clear.

Re-routed USB cables

Aug 03, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Mounted the sequential shifter arm

Aug 03, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Mounted the sequential shifter arm

Aug 02, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Re-routed USB cables

Aug 02, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Showcase refresh

Aug 02, 2026 0.75h

Bundled the last two USB leads into the rear loom so the floor under the seat stays clear.

Mounted the sequential shifter arm

Aug 01, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Re-routed USB cables

Aug 01, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Mounted the sequential shifter arm

Jul 31, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Re-routed USB cables

Jul 31, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Showcase refresh

Jul 31, 2026 0.75h

Bundled the last two USB leads into the rear loom so the floor under the seat stays clear.

Re-routed USB cables

Jul 30, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Mounted the sequential shifter arm

Jul 30, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Showcase refresh

Jul 30, 2026 0.75h

Bundled the last two USB leads into the rear loom so the floor under the seat stays clear.

Re-routed USB cables

Jul 29, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Mounted the sequential shifter arm

Jul 29, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Showcase refresh

Jul 29, 2026 0.75h

Bundled the last two USB leads into the rear loom so the floor under the seat stays clear.

Mounted the sequential shifter arm

Jul 28, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Re-routed USB cables

Jul 28, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Showcase refresh

Jul 28, 2026 0.75h

Bundled the last two USB leads into the rear loom so the floor under the seat stays clear.

Mounted the sequential shifter arm

Jul 27, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Re-routed USB cables

Jul 27, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Mounted the sequential shifter arm

Jul 26, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Re-routed USB cables

Jul 26, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Showcase refresh

Jul 26, 2026 0.75h

Bundled the last two USB leads into the rear loom so the floor under the seat stays clear.

Re-routed USB cables

Jul 25, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Mounted the sequential shifter arm

Jul 25, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Mounted the sequential shifter arm

Jul 24, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Re-routed USB cables

Jul 24, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Showcase refresh

Jul 24, 2026 0.75h

Bundled the last two USB leads into the rear loom so the floor under the seat stays clear.

Mounted the sequential shifter arm

Jul 23, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Re-routed USB cables

Jul 23, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Re-routed USB cables

Jul 22, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Mounted the sequential shifter arm

Jul 22, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Showcase refresh

Jul 22, 2026 0.75h

Bundled the last two USB leads into the rear loom so the floor under the seat stays clear.

Re-routed USB cables

Jul 21, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Mounted the sequential shifter arm

Jul 21, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Showcase refresh

Jul 21, 2026 0.75h

Bundled the last two USB leads into the rear loom so the floor under the seat stays clear.

Mounted the sequential shifter arm

Jul 20, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Re-routed USB cables

Jul 20, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Mounted the sequential shifter arm

Jul 19, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Re-routed USB cables

Jul 19, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Showcase refresh

Jul 19, 2026 0.75h

Bundled the last two USB leads into the rear loom so the floor under the seat stays clear.

Mounted the sequential shifter arm

Jul 18, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Re-routed USB cables

Jul 18, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Showcase refresh

Jul 18, 2026 0.75h

Bundled the last two USB leads into the rear loom so the floor under the seat stays clear.

Re-routed USB cables

Jul 17, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Mounted the sequential shifter arm

Jul 17, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Showcase refresh

Jul 17, 2026 0.75h

Bundled the last two USB leads into the rear loom so the floor under the seat stays clear.

Re-routed USB cables

Jul 16, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Mounted the sequential shifter arm

Jul 16, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Mounted the sequential shifter arm

Jul 15, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Re-routed USB cables

Jul 15, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Showcase refresh

Jul 15, 2026 0.75h

Bundled the last two USB leads into the rear loom so the floor under the seat stays clear.

Mounted the sequential shifter arm

Jul 14, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Re-routed USB cables

Jul 14, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Showcase refresh

Jul 14, 2026 0.75h

Bundled the last two USB leads into the rear loom so the floor under the seat stays clear.

Mounted the sequential shifter arm

Jul 13, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Re-routed USB cables

Jul 13, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Mounted the sequential shifter arm

Jul 12, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Re-routed USB cables

Jul 12, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Re-routed USB cables

Jul 11, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Mounted the sequential shifter arm

Jul 11, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Mounted the sequential shifter arm

Jul 10, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Re-routed USB cables

Jul 10, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Mounted the sequential shifter arm

Jul 09, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Re-routed USB cables

Jul 09, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Re-routed USB cables

Jul 08, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Mounted the sequential shifter arm

Jul 08, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Re-routed USB cables

Jul 07, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Mounted the sequential shifter arm

Jul 07, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Re-routed USB cables

Jul 06, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Mounted the sequential shifter arm

Jul 06, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Re-routed USB cables

Jul 05, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Mounted the sequential shifter arm

Jul 05, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Re-routed USB cables

Jul 04, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Mounted the sequential shifter arm

Jul 04, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Re-routed USB cables

Jul 03, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Mounted the sequential shifter arm

Jul 03, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Re-routed USB cables

Jul 02, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Mounted the sequential shifter arm

Jul 02, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Re-routed USB cables

Jul 01, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Mounted the sequential shifter arm

Jul 01, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Re-routed USB cables

Jun 30, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Mounted the sequential shifter arm

Jun 30, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Re-routed USB cables

Jun 29, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Mounted the sequential shifter arm

Jun 29, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Mounted the sequential shifter arm

Jun 28, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Re-routed USB cables

Jun 28, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Re-routed USB cables

Jun 27, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Mounted the sequential shifter arm

Jun 27, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Re-routed USB cables

Jun 26, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Mounted the sequential shifter arm

Jun 26, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Mounted the sequential shifter arm

Jun 25, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Re-routed USB cables

Jun 25, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Re-routed USB cables

Jun 24, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Mounted the sequential shifter arm

Jun 24, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Re-routed USB cables

Jun 23, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Mounted the sequential shifter arm

Jun 23, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Re-routed USB cables

Jun 22, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Mounted the sequential shifter arm

Jun 22, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Re-routed USB cables

Jun 21, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Mounted the sequential shifter arm

Jun 21, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Re-routed USB cables

Jun 20, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Mounted the sequential shifter arm

Jun 20, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Mounted the sequential shifter arm

Jun 19, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Re-routed USB cables

Jun 19, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Re-routed USB cables

Jun 18, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Mounted the sequential shifter arm

Jun 18, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Mounted the sequential shifter arm

Jun 17, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Re-routed USB cables

Jun 17, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Mounted the sequential shifter arm

Jun 16, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Re-routed USB cables

Jun 16, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Mounted the sequential shifter arm

Jun 15, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Re-routed USB cables

Jun 15, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Mounted the sequential shifter arm

Jun 14, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Re-routed USB cables

Jun 14, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Mounted the sequential shifter arm

Jun 13, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Re-routed USB cables

Jun 13, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Mounted the sequential shifter arm

Jun 12, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Re-routed USB cables

Jun 12, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Mounted the sequential shifter arm

Jun 11, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Re-routed USB cables

Jun 11, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Re-routed USB cables

Jun 10, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Mounted the sequential shifter arm

Jun 10, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Re-routed USB cables

Jun 09, 2026 1.25h

Bundled the wheelbase, dash, and pedal USB leads into a single loom exiting near the rear upright.

Mounted the sequential shifter arm

Jun 09, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Mounted the sequential shifter arm

Jun 08, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Mounted the sequential shifter arm

Jun 07, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Mounted the sequential shifter arm

Jun 06, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Mounted the sequential shifter arm

Jun 05, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Mounted the sequential shifter arm

Jun 04, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Mounted the sequential shifter arm

Jun 03, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Mounted the sequential shifter arm

Jun 02, 2026 2.25h

Used a double-bracket arrangement so the arm stays stiff without blocking the seat slider handle.

Photos

1 photo

Showcase reference view