Panel fabrication
Front panel remake with modular inserts so the standby cluster and annunciator strip can be serviced without removing the whole panel.
Build log
76 itemsTest-fitted standby panel
Adjusted the standby opening by 1.5 mm to stop the bezel from binding after paint.
Test-fitted standby panel
Adjusted the standby opening by 1.5 mm to stop the bezel from binding after paint.
Test-fitted standby panel
Adjusted the standby opening by 1.5 mm to stop the bezel from binding after paint.
Test-fitted standby panel
Adjusted the standby opening by 1.5 mm to stop the bezel from binding after paint.
Test-fitted standby panel
Adjusted the standby opening by 1.5 mm to stop the bezel from binding after paint.
Test-fitted standby panel
Adjusted the standby opening by 1.5 mm to stop the bezel from binding after paint.
Test-fitted standby panel
Adjusted the standby opening by 1.5 mm to stop the bezel from binding after paint.
Cut new annunciator carrier
Machined a separate carrier plate for the annunciator row so LED boards can slide out from the rear.
Cut new annunciator carrier
Machined a separate carrier plate for the annunciator row so LED boards can slide out from the rear.
Test-fitted standby panel
Adjusted the standby opening by 1.5 mm to stop the bezel from binding after paint.
Cut new annunciator carrier
Machined a separate carrier plate for the annunciator row so LED boards can slide out from the rear.
Test-fitted standby panel
Adjusted the standby opening by 1.5 mm to stop the bezel from binding after paint.
Cut new annunciator carrier
Machined a separate carrier plate for the annunciator row so LED boards can slide out from the rear.
Test-fitted standby panel
Adjusted the standby opening by 1.5 mm to stop the bezel from binding after paint.
Test-fitted standby panel
Adjusted the standby opening by 1.5 mm to stop the bezel from binding after paint.
Cut new annunciator carrier
Machined a separate carrier plate for the annunciator row so LED boards can slide out from the rear.
Test-fitted standby panel
Adjusted the standby opening by 1.5 mm to stop the bezel from binding after paint.
Cut new annunciator carrier
Machined a separate carrier plate for the annunciator row so LED boards can slide out from the rear.
Test-fitted standby panel
Adjusted the standby opening by 1.5 mm to stop the bezel from binding after paint.
Cut new annunciator carrier
Machined a separate carrier plate for the annunciator row so LED boards can slide out from the rear.
Cut new annunciator carrier
Machined a separate carrier plate for the annunciator row so LED boards can slide out from the rear.
Test-fitted standby panel
Adjusted the standby opening by 1.5 mm to stop the bezel from binding after paint.
Test-fitted standby panel
Adjusted the standby opening by 1.5 mm to stop the bezel from binding after paint.
Cut new annunciator carrier
Machined a separate carrier plate for the annunciator row so LED boards can slide out from the rear.
Test-fitted standby panel
Adjusted the standby opening by 1.5 mm to stop the bezel from binding after paint.
Cut new annunciator carrier
Machined a separate carrier plate for the annunciator row so LED boards can slide out from the rear.
Test-fitted standby panel
Adjusted the standby opening by 1.5 mm to stop the bezel from binding after paint.
Cut new annunciator carrier
Machined a separate carrier plate for the annunciator row so LED boards can slide out from the rear.
Cut new annunciator carrier
Machined a separate carrier plate for the annunciator row so LED boards can slide out from the rear.
Test-fitted standby panel
Adjusted the standby opening by 1.5 mm to stop the bezel from binding after paint.
Test-fitted standby panel
Adjusted the standby opening by 1.5 mm to stop the bezel from binding after paint.
Cut new annunciator carrier
Machined a separate carrier plate for the annunciator row so LED boards can slide out from the rear.
Cut new annunciator carrier
Machined a separate carrier plate for the annunciator row so LED boards can slide out from the rear.
Test-fitted standby panel
Adjusted the standby opening by 1.5 mm to stop the bezel from binding after paint.
Cut new annunciator carrier
Machined a separate carrier plate for the annunciator row so LED boards can slide out from the rear.
Test-fitted standby panel
Adjusted the standby opening by 1.5 mm to stop the bezel from binding after paint.
Cut new annunciator carrier
Machined a separate carrier plate for the annunciator row so LED boards can slide out from the rear.
Test-fitted standby panel
Adjusted the standby opening by 1.5 mm to stop the bezel from binding after paint.
Cut new annunciator carrier
Machined a separate carrier plate for the annunciator row so LED boards can slide out from the rear.
Test-fitted standby panel
Adjusted the standby opening by 1.5 mm to stop the bezel from binding after paint.
Test-fitted standby panel
Adjusted the standby opening by 1.5 mm to stop the bezel from binding after paint.
Cut new annunciator carrier
Machined a separate carrier plate for the annunciator row so LED boards can slide out from the rear.
Test-fitted standby panel
Adjusted the standby opening by 1.5 mm to stop the bezel from binding after paint.
Cut new annunciator carrier
Machined a separate carrier plate for the annunciator row so LED boards can slide out from the rear.
Cut new annunciator carrier
Machined a separate carrier plate for the annunciator row so LED boards can slide out from the rear.
Test-fitted standby panel
Adjusted the standby opening by 1.5 mm to stop the bezel from binding after paint.
Cut new annunciator carrier
Machined a separate carrier plate for the annunciator row so LED boards can slide out from the rear.
Test-fitted standby panel
Adjusted the standby opening by 1.5 mm to stop the bezel from binding after paint.
Cut new annunciator carrier
Machined a separate carrier plate for the annunciator row so LED boards can slide out from the rear.
Test-fitted standby panel
Adjusted the standby opening by 1.5 mm to stop the bezel from binding after paint.
Cut new annunciator carrier
Machined a separate carrier plate for the annunciator row so LED boards can slide out from the rear.
Test-fitted standby panel
Adjusted the standby opening by 1.5 mm to stop the bezel from binding after paint.
Test-fitted standby panel
Adjusted the standby opening by 1.5 mm to stop the bezel from binding after paint.
Cut new annunciator carrier
Machined a separate carrier plate for the annunciator row so LED boards can slide out from the rear.
Cut new annunciator carrier
Machined a separate carrier plate for the annunciator row so LED boards can slide out from the rear.
Test-fitted standby panel
Adjusted the standby opening by 1.5 mm to stop the bezel from binding after paint.
Cut new annunciator carrier
Machined a separate carrier plate for the annunciator row so LED boards can slide out from the rear.
Test-fitted standby panel
Adjusted the standby opening by 1.5 mm to stop the bezel from binding after paint.
Cut new annunciator carrier
Machined a separate carrier plate for the annunciator row so LED boards can slide out from the rear.
Test-fitted standby panel
Adjusted the standby opening by 1.5 mm to stop the bezel from binding after paint.
Cut new annunciator carrier
Machined a separate carrier plate for the annunciator row so LED boards can slide out from the rear.
Test-fitted standby panel
Adjusted the standby opening by 1.5 mm to stop the bezel from binding after paint.
Cut new annunciator carrier
Machined a separate carrier plate for the annunciator row so LED boards can slide out from the rear.
Test-fitted standby panel
Adjusted the standby opening by 1.5 mm to stop the bezel from binding after paint.
Cut new annunciator carrier
Machined a separate carrier plate for the annunciator row so LED boards can slide out from the rear.
Test-fitted standby panel
Adjusted the standby opening by 1.5 mm to stop the bezel from binding after paint.
Test-fitted standby panel
Adjusted the standby opening by 1.5 mm to stop the bezel from binding after paint.
Cut new annunciator carrier
Machined a separate carrier plate for the annunciator row so LED boards can slide out from the rear.
Cut new annunciator carrier
Machined a separate carrier plate for the annunciator row so LED boards can slide out from the rear.
Test-fitted standby panel
Adjusted the standby opening by 1.5 mm to stop the bezel from binding after paint.
Cut new annunciator carrier
Machined a separate carrier plate for the annunciator row so LED boards can slide out from the rear.
Cut new annunciator carrier
Machined a separate carrier plate for the annunciator row so LED boards can slide out from the rear.
Cut new annunciator carrier
Machined a separate carrier plate for the annunciator row so LED boards can slide out from the rear.
Cut new annunciator carrier
Machined a separate carrier plate for the annunciator row so LED boards can slide out from the rear.
Cut new annunciator carrier
Machined a separate carrier plate for the annunciator row so LED boards can slide out from the rear.
Cut new annunciator carrier
Machined a separate carrier plate for the annunciator row so LED boards can slide out from the rear.
Bill of Materials
Totale geschatte kosten: € 112,60
EUR · Prijzen inclusief btw
| Onderdeel | Aantal | Stuksprijs | Totaal | Leverancier | Status |
|---|---|---|---|---|---|
|
3 mm acrylic front panel
Laser-cut locally
|
2.0 | € 39,50 | € 79,00 | — | Geinstalleerd |
|
M3 brass heat-set inserts
|
40.0 | € 0,18 | € 7,20 | — | Ontvangen |
|
Warm white 12 V annunciator LEDs
|
24.0 | € 1,10 | € 26,40 | — | Geinstalleerd |
Foto's
1 fotoShowcase reference view